From: Mike Connelley 
Date: Mon, 14 Nov 2016 15:22:33 -1000
Subject: MORIS CCD swap
To: Techgroup 

Hello:

   Today Darryl, Tony, and I swapped the CCD on MORIS.  It mechanically fit
ok.  We had to cut a relief into the yellow 'cage' around the CCD to
provide clearance for the power cable (black cable w/ gray connector).
There is a mis-match in the BNC connector for the GPS trigger.  Also, the
new PC isn't communicating with the GPS unit, but the old PC does.  So
those 2 things need to be sorted but won't affect initial testing.  Tony
was able to take an initial dark image with the VNC interface and
initialize the filter wheel.

   We don't have the final power cable.  Once the cables are finalized,
we'll add a cable clamp at the yellow cage to make sure that the cables
can't wiggle loose or yank on the connector.

Cheers
Mike