File Name: UDRDEMO.TXT                              Last Rev: 11/10/95

  An executable demo program is included with the Universal Protocol 
  Driver Development Kit. The demo program may be useful in the 
  development or operation of Universal master drivers.

  COM#DEMO.EXE  - Examples of the SIXNET Universal Protocol running over 
                  an RS232 com port (com port #1 or #2).  

  COM#DEMO.EXE is set to run over a com port betweeen two computers 
  connected by a NULL Modem cable. One computer will run the COM#DEMO.EXE. 
  If you wish to use another comport, the file COMDEMO.C will need to be
  changed and recompiled. COM#DEMO.EXE uses the Universal Protocol to 
  continuously poll for I/O values.  It will also send a command to write 
  an output value only when the user changes the value.

  The second computer, which must be running Windows, will act as a 
  SIXNET station simulator and will respond to messages sent by the 
  first computer. To run this simulator, you must first install the SIXNET
  Control Room (ST-SCR two disk set) and select the `IO Simulator' icon 
  in the Sixtrak program group.